AC-100
New Sulfur Donor Accelerator |
 |
|
Chemical Name |
Diisopropyl xanthogen polysulphide |
|
Chemical Formula |
/ |
|
Synonym |
Robac as-100 |
|
CAS NO |
137398-54-0 |
New Sulfur Donor
Accelerator |
1. If is a FDA approved vulcanization accelerator for use in NR,synthetic polyisoprene and NBR |
|
2. The vulcanizaties obtained with disopropyl xanthogen polysulphide are transparent and free from copper staining |
|
3. AC-100 also acts as a sulfur donor used in natural and synthetic rubber (including EPDM). |
|
4. It is recommended for use as a primary and secondary accelerator in the presence of low levels of sulfur |
|
5.AC-100 synergles most effectively with other accelerators particularly TBzTD,MBTS and TBBS other in the presence or absence of demental sulfur. |
|
6. Can be used in low-temperature cure. |
|
Application |
1.AC-100 is widely used in NR,IR,NBR,EPDM,IIR,Latex and adhesion agent. |
|
2. When used in molded products(such as NR and Synthetic Polyisprene),with sulfur 1.2-1.6phr,it is recommended to add AC-100 1.2-2.0 phr and TBzTD or MBT 0.2-0.4 phr. |
|
3. In the sulphur donor cure system of heat-stable and low compression set vulcanizates(black filled NR,Polyisoprene and NBR),it is recommended to use AC-100 1.0-2.0 phr together with TMzTD 1.8-2.2 phr and TBBS 0.75-1.0 phr. |
|
4. AC-100 can be used as an emulsion and bring the pre and post vulcanised NR latex with good physical properties. |
5. In the application for Carboxylated nitrile latex,AC-100 is also recommended to be used as accelerator(emulsion),with dosage 1.0-1.2 phr.
|